Development of novel non-isolated unidirectional DCDC multistage power converter configurations for renewable energy applications- hardware implementation and investigation studies

Abstract: In the last decades, there is a rapid development towards new energy sources due to the increasing demand of energy and cost of the fossil fuels. Renewable energy sources getting more popular day by day due to government support and carbon dioxide (CO2) emission reduction policy to reduce greenhouse gas emissions. Photovoltaic energy generation is the excellent example of energy generation through various serious parallel arrangement of a small voltage generating cells or modules. There are directly use of synchronous generators to transfer power to grid from hydro energy plant, geothermal energy plant, bio-fuel energy plants. However, the photovoltaic energy generation systems requires the power electronic converters system to satisfy the demand of realtime application or electric grid. Therefore, for real-time applications or before feeding energy to the grid via inverter, photovoltaic systems linked with DC-DC converters, which have high-voltage conversion ratio capability. Thus, DC-DC power converter is the paramount constituent in the photovoltaic power conversion stage. This research work carried out in focusing on hardware implementation and investigation studies of novel non-isolated unidirectional DC-DC multistage power converter configurations for renewable energy application. The comprehensive review of various unidirectional non-isolated DC-DC multistage power converters are presented and it is found that not all of them have the capability to convert low voltage into high voltage, thus not suitable for photovoltaic energy applications. It is investigated that there is a scope to design new DC-DC multistage power converter topologies configurations with high voltage conversion ratio by employing a new arrangement of reactive elements and semiconductor devices. A new breed of DC-DC multistage power converters called “X-Y converter family” proposed for photovoltaic application by utilizing the switchedinductor, the switched capacitor, the voltage lift switch capacitor and modified voltage lift switched capacitor, voltage doubler and multiplier boosting techniques. The derivation of voltage conversion ratio, advantage of each converter of X-Y family and hierarchy of X-Y family is discussed. The research work also proposed a new DC-DC multistage power converter without a magnetic component for photovoltaic application by utilizing the concept of switched capacitors. An original Transformer and Switched Capacitor (T-SC) based multistage power converter proposed for high-voltage/lowcurrent photovoltaic applications by combining the feature of the boost converter, transformer and switched capacitor. New Nx IMBC (Nx Interleaved Multilevel Boost Converter) or Cockcroft Walton (CW) Voltage Multiplier based Multistage/Multilevel Power Converter (CW-VM-MPC) converter topologies are presented to achieve maximum voltage conversion ratio by utilizing the feature of Cockcroft Walton (CW) voltage multiplier. Moreover, the proposed multistage power converter compared with each other as well as recently proposed multistage power converters in term of voltage conversion ratio, number of devices and costs.D.Eng. (Electrical and Electronic Engineering

A multistage DC-DC step-up self-balanced and magnetic component-free converter for photovoltaic applications : hardware implementation

Abstract: This article presents a self-balanced multistage DC-DC step-up converter for photovoltaic applications. The proposed converter topology is designed for unidirectional power transfer and provides a doable solution for photovoltaic applications where voltage is required to be stepped up without magnetic components (transformer-less and inductor-less). The output voltage obtained from renewable sources will be low and must be stepped up by using a DC-DC converter for photovoltaic applications. 2 K diodes and 2 K capacitors along with two semiconductor control switch are used in the K-stage proposed converter to obtain an output voltage which is (K + 1) times the input voltage. The conspicuous features of proposed topology are: (i) magnetic component free (transformer-less and inductor-less); (ii) continuous input current; (iii) low voltage rating semiconductor devices and capacitors; (iv) modularity; (v) easy to add a higher number of levels to increase voltage gain; (vi) only two control switches with alternating operation and simple control. The proposed converter is compared with recently described existing transformer-less and inductor-less power converters in term of voltage gain, number of devices and cost. The application of the proposed circuit is discussed in detail. The proposed converter has been designed with a rated power of 60 W, input voltage is 24 V, output voltage is 100 V and switching frequency is 100 kHz. The performance of the converter is verified through experimental and simulation results

An improved multistage switched inductor boost converter (improved M-SIBC) for renewable energy applications: a key to enhance conversion ratio

In this article, an improved Multistage Switched Inductor (M-SI) based power converter or Improved Multistage Switched Inductor Boost Converter (Improved M-SIBC) is proposed for renewable applications which provides a key to enhance voltage conversion ratio. In last decades, Switched Inductor (SI) and M-SI are the popular network/technique employed in DC-DC converter to achieve high voltage conversion ratio. An improved SI and M-SI network/technique is proposed to enhance the existing the voltage conversion capabilities of SI and M-SI by replacing central uncontrolled switches by polarized capacitor. The anticipated power converter configuration combines the feature of conventional boost converter and improved M-SI. The voltage conversion a capability is depends on the number of stages of M-SI and ON time of control switch. The operation modes and characteristics of proposed converter with steady state mathematical analysis for N-stages are discussed in detail. Moreover, the proposed converter compared with existing converter in terms of voltage conversion ratio and the detail of number of components is also provided. Matrix Laboratory R2016a simulation results of 100W proposed improved M-SIBC with considering three stages are provided and the results always shows a good agreement with theoretical analysis and also validates the improved M-SI network concept

Double Stage Double Output DC–DC Converters for High Voltage Loads in Fuel Cell Vehicles

This article aims to enhance the output voltage magnitude of fuel cells (FCs), since the actual generation is low. The traditional technique is too complicated and has a cascaded or parallel connection solution to achieve high voltage for multiple loads in vehicles. In this case, electronic power converters are a viable solution with compact size and cost. Hence, double or multiple output DC–DC converters with high voltage step up are required to feed multiple high voltage loads at the same time. In this article, novel double stage double output (DSDO) DC–DC converters are formulated to feed multiple high voltage loads of FC vehicular system. Four DSDO DC–DC converters called DSDO L–L, DSDO L-2L, DSDO L-2LC, and DSDO L-2LC are developed in this research work and all the converters are derived based on the arrangement of different reactive networks. The primary power circuitry, conceptual operation, and output voltage gain derivation are given in detail with valid proof. The proposed converters are compared with possible parallel combinations of conventional converters and recently available configuration. Comprehensive numerical simulation and experimental prototype results show that our theoretical predictions are valid and that the configuration is applicable for real time application in FC technologies for ‘more-electric vehicles’

Hextuple-inverter configuration for multilevel nine-phase symmetrical open-winding converter

Abstract: Hextuple-inverter configuration for multilevel nine-phase symmetrical open-winding DC converter is articulated in this work. Power modular unit consists of six classical three-phase voltage source inverters (VSI). Each VSI includes one bi-directional device (MOSFET/IGBT) per each phase and link to two capacitors for neutral connection. A modified single carrier five-level modulation (MSCFM) algorithm is developed and modulates each 2-level VSI as 5- level multilevel inverter (MLI). A set of test results is presented, which are observed from the model based developments in numerical simulation software’s (Matlab/PLECS). The results always showed good conformity with the developed theoretical background under working conditions. The proposed converter found suited for (low-voltage/high current) electric vehicles, DC tractions and ‘More-Electric Aircraft’ applications

DC-Transformer Modelling, Analysis and Comparison of the Experimental Investigation of a Non-Inverting and Non-Isolated Nx Multilevel Boost Converter (Nx MBC) for Low to High DC Voltage Applications

This paper mainly focuses on the analysis, DC-transformer modeling, comparison, and experimental investigation of a non-inverting and non-isolated Nx multilevel boost converter (Nx MBC) for low to high DC applications. Recently, numerous isolated and non-isolated DC-DC converter configurations have been addressed for low to high DC voltage conversion purposes, which is vital for several applications (e.g., renewable energy, medical equipment, hybrid vehicles, fuel cells, DC-links, multilevel inverters, and drive applications), by utilizing and modifying the structure of reactive elements (switched capacitors and switched inductor circuitry). Among all the switched reactive structures, voltage multiplier circuitry provides a feasible solution for low to high DC voltage conversion due to its flexible and modular structure, voltage clamping capability, reduced rating of components, and ease of modification. Non-inverting and non-isolated Nx MBC combine the features and structures of conventional boost converters and voltage multiplier circuitry. DC-transformer modeling of Nx MBC is discussed for the continuous current mode (CCM) and discontinuous current mode (DCM), which helps to analyze the characteristics of the converter in a more practical way and helps to study the effect of semiconductor components, internal resistances, and load on the voltage conversion ratio of the converter. The mode of operation of Nx MBC in the CCM and DCM is also discussed with the boundary condition. The derived analysis is verified by simulations and experimental investigations, and the obtained results of 3x MBC always show good agreement with each other and the theoretical analysis

An original transformer and switched-capacitor (T & SC)-based extension for DC-DC boost converter for high-voltage/low-current renewable energy applications:Hardware implementation of a new T & SC boost converter

In this article a new Transformer and Switched Capacitor-based Boost Converter (T & SC-BC) is proposed for high-voltage/low-current renewable energy applications. The proposed T & SC-BC is an original extension for DC-DC boost converter which is designed by utilizing a transformer and switched capacitor (T & SC). Photovoltaic (PV) energy is a fast emergent segment among the renewable energy systems. The proposed T & SC-BC combines the features of the conventional boost converter and T & SC to achieve a high voltage conversion ratio. A Maximum Power Point Tracking (MPPT) controller is compulsory and necessary in a PV system to extract maximum power. Thus, a photovoltaic MPPT control mechanism also articulated for the proposed T & SC-BC. The voltage conversion ratio (Vo/Vin) of proposed converter is (1 + k)/(1 − D) where, k is the turns ratio of the transformer and D is the duty cycle (thus, the converter provides 9.26, 13.88, 50/3 voltage conversion ratios at 78.4 duty cycle with k = 1, 2, 2.6, respectively). The conspicuous features of proposed T & SC-BC are: (i) a high voltage conversion ratio (Vo/Vin); (ii) continuous input current (Iin); (iii) single switch topology; (iv) single input source; (v) low drain to source voltage (VDS) rating of control switch; (vi) a single inductor and a single untapped transformer are used. Moreover, the proposed T & SC-BC topology was compared with recently addressed DC-DC converters in terms of number of components, cost, voltage conversion ratio, ripples, efficiency and power range. Simulation and experimental results are provided which validate the functionality, design and concept of the proposed approach

Grid synchronization of a seven-phase wind electric generator using d-q PLL

Abstract: The evolving multiphase induction generators (MPIGs) with more than three phases are receiving prominence in high power generation systems. This paper aims at the development of a comprehensive model of the wind turbine driven seven-phase induction generator (7PIG) along with the necessary power electronic converters and the controller for grid interface. The dynamic model of the system is developed in MATLAB/Simulink (R2015b, The MathWorks, Inc., Natick, MA, USA). A synchronous reference frame phase-locked loop (SRFPLL) system is incorporated for grid synchronization. The modeling aspects are detailed and the system response is observed for various wind velocities. The effectiveness of the seven phase induction generator is demonstrated with the fault tolerant capability and high output power with reduced phase current when compared to the conventional 3-phase wind generation scheme. The response of the PLL is analysed and the results are presented